Commercial Electric CE1011S-06 Instruction Manual download pdf (Page 6)

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

1. Thread the Fixture Mounting Screws (#8) onto the Outlet Box (#6), as shown. (Fig. 2)

2. Pull the power supply wires out from the Outlet Box (#6). Attach the Black Supply Wire (#14)

to the Black Fixture Wire (#15) and the White Supply Wire (#9) to the White Fixture Wire (#11)

using Wire Nuts (#10). Connect the Fixture Ground Wire (#12) and the Supply Ground Wire

(#13) together using a Wire Nut (#10). (Fig. 3) Wrap all wire connections with electrical tape for

a more secure connection. Note: If you have electrical questions, consult your local electrical

code for approved grounding methods.

3. Carefully, tuck all the wires and wire connections into the Outlet Box (#6). Place the Fixture Pan

(#1) over the Outlet Box (#6) and onto the Fixture Mounting Screws (#8), making sure they feed

through the Keyhole Slots (#16). (Fig. 4)

4. Twist the Fixture Pan (#1) clockwise, so that the Fixture Mounting Screws (#8) slide into the

narrow ends of the Keyhole Slots (#16). Tighten the Fixture Mounting Screws (#8) so that the

Fixture Pan (#1) is secured flush against the Ceiling. (Fig. 4 and 4-1)

5. Proceed to Step 3 of the Assembly Instructions.

6. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch

on to activate the fixture.

1 ea Fixture Pan (#1)

2 ea Fixture Mounting

Screws (#8)

3 ea Wire Nuts (#10)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Commercial Electric CE1011S-06 Instruction Manual Page 6