Commercial Electric DC5237WH-A Use and Care Manual download pdf

8 a.m. - 6 p.m., EST, Monday - Friday

1-877-527-0313

USE AND CARE GUIDE

8 FT FLEXIBLE LED RGB LIGHT STRIP

Installation

Operation

Operating the remote

BUTTON DESCRIPTIONS

Part Description

LED light strip

LED driver

Connector plug

Remote

Troubleshooting

The power supply wire is not

securely connected to the light

strip.

The driver does not have power.

Problem

Possible Cause

Solution

The light strip does

not turn on.

An additional

connected section

of light strip does

not turn on.

The remote does not have a

direct line of sight to the IR eye

on the driver or is too far away.

The connections are not secure,

or the polarity is incorrect.

Check the connections and make sure

the connector plug is securely

connected to the copper connections

of both light strips. Make sure the

polarities match ( + to + and B to B,

etc).

Plug the driver into a live 120V

receptacle.

Check the connection and make sure

the power supply wire is securely

connected to the copper connections

of the light strip.

TOOLS REQUIRED

Safety

goggles

Scissors

Phillips

screwdriver

Drill

Hammer

Boxcutter

Hardware not shown to actual size.

HARDWARE INCLUDED

Installing the LED driver

Clean the location in which the light strip (A) is

to be mounted to make sure it is free from dirt,

dust, and oil, or anything that will inhibit

the adhesive from making solid contact to the

mounting surface.

Install the LED driver (B) in the desired location

using the mounting screws (BB) and mounting

holes provided on the LED driver (B).

Connect the female plug end of the LED

light strip (A) to the male plug of the LED

driver (B).

Questions, problems, missing parts? Before returning to store,

HOMEDEPOT.COM

Safety Information

Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.

THANK YOU

Warranty

PACKAGE CONTENTS

Aim the remote directly at the eye attached to

the driver (B), and press the ON button and

additional control buttons on the remote (C).

Pull out the plastic battery barrier sheet from

the battery compartment located on the

bottom of the remote (C).

Peel off the adhesive backing on the light strip (A),

and secure the light strip (A) to the desired location

Care and Cleaning

Check to make sure the plastic battery

barrier sheet has been removed. Check

to make sure the polarity of the

batteries is correct. Check to make sure

the batteries are not dead.

Check the line of sight and move the IR

eye on the driver accordingly. Make

sure that the distance between the

remote control and the IR eye on the

driver is within 22 feet or 7 meters.

Pre-Installation

Batteries in the remote are

dead, not installed correctly, or

the plastic barrier sheet has

not been removed.

call Commerial Electric Customer Service

Pre-Installation

eye

Quantity

Preparing the light strip (optional)

Installing the light strip

Secure the power supply wire and the attached

eye wire to the desired location using the wire

clips (AA) provided.

NOTE:

Retain this manual for future use.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of

products available for your home improvement needs. Thank you for choosing Commercial Electric!

□

Observe proper polarity when changing batteries.

The lamp may not light if the batteries are

inserted incorrectly.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

When not using this product for extended periods,

remove the batteries to prevent product damage

due to battery leakage.

Installing the connector plug (optional)

The LED light strip (A) can be cut to a desired length; however, it can only be cut where marked with

scissors, approximately every 4 inches. Do not cut the silver color solder marks. Only cut in the center of

the copper pads as shown.

To adjust the length, use the following steps:

Locate the cutable locations on the strip light (A), starting from the end that has the power supply

wire attached.

Choose the location to be cut that best suits the length of strip light needed to illuminate the

desired area.

Using sharp scissors or wire strippers, cut directly through the center of the cut line. Be sure to

leave enough room on either side of the strip to attach the connector plug (D) if needed.

OFF

Brighten

Dim

FLASH

STROBE

FADE

SMOOTH

Red

Green

Blue

White

Changes between

red/green/blue.

between all colors

Smoothly fades

across all colors.

Smoothly fades

across red/green/

blue.

Before attempting to clean the light strip, unplug the driver box from the power outlet.

To clean the light strip, use a clean, dry or slightly damp cloth.

Allow the light strip and components to dry thoroughly before plugging the driver unit back into the

outlet.

Do not use any cleaners with chemicals, solvents, or harsh abrasives, as damage to the light strip

may occur.

Item #1000 009 214

Model #DC5237WH-A

of one year from the date of purchase. If within this period the product is found to be defective in material

or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the

original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price

excludes liability for direct, incidental, or consequential damages. As some states do not allow exclusions

or limitations on an implied warranty, so the above exclusions and limitations may not apply. This warranty

+12V

IMPORTANT SAFETY INSTRUCTIONS

(Save These Instructions)

This portable luminaire has a polarized plug (one

blade is wider than the other) as a feature to

only one way into a polarized outlet. If the plug

does not insert fully into the outlet, reverse the

electrician for assistance. Never use this product

with an extension cord unless the plug can be

fully inserted. Do not alter the plug in any way,

as serious injury or damage may result.

CAUTION:

To avoid electrical shock or

product failure, this lamp must be used in

only.

CAUTION:

To avoid damage to the

light strip, do not twist the light strip

or bend the light strip 90 degrees.

Do not cut the silver solder markings,

only the copper colored pads.

CAUTION:

damage, or early lamp failure, this lamp should

not be used in heat-producing appliances.

CAUTION:

WARNING: D

o not connect another strip to

this single adapter.

WARNING:

unit not expressly approved by the party

responsible for compliance could void the

user’s authority to operate the equipment.

AA - Wire clip x 6

BB - Mounting screw x 2

NOTE: The maximum operating distance, with new

batteries, between the remote (C) and the eye on the

driver (B) is approximately 7 meters (22 feet) with a

direct line of sight between the two.

+12V

OFF

FLASH

STROBE

FADE

SMOOTH

+12V

20W rated power supply is intended

to operate the 8 ft tape light in this kit only.

CAUTION:

Risk of Fire - Do not operate the

unit while coiled.

Connector plug (D) is provided for making 90 degree installations, or mounting the light strip in

sections (such as jumping cabinets). See section 4 for installing connector plug.

Connector plug (D) with longer cord length is available. Contact customer service if longer length

is needed.

To operate the Brighten and Dim controls, hold the button down

until reaching desired light output.

Connector (D) is provided for extending the light strip into other areas or for turning corners (90

degree installations).

Follow the instructions under Section 1 for cutting the tape.

Once the tape is cut, Carefully peel back the plastic on the light strip (A) approximately 1/4 in. to

expose the copper conductors, and cut the excess plastic off with a box cutter or sharp razor blade.

Open the cover on the connector plug (D). Align the 2 sections of the light strip (A), making sure that

the polarities are the same ( + to + and B to B, etc).

tape strip and use the opposite end for proper +12V/G/R/B alignment.

Insert both ends of the light strip (A) into the connector plug (D), placing the light strip under the

connector pins. Make sure the contacts are secure, and snap the cover closed.

1 2

Summary of Contents

Page 1 - Care and Cleaning

8 a.m. - 6 p.m., EST, Monday - Friday 1-877-527-0313USE AND CARE GUIDE8 FT FLEXIBLE LED RGB LIGHT STRIPInstallationInstallationOperationOperating the

Page 2 - Cuidado y limpieza

1-877-527-0313GUÍA DE USO Y CUIDADOBARRA DE LUCES LED RGB, FLEXIBLE, DE 8 PIES (2,44M) InstalaciónInstalaciónOperationCómo operar el con

Comments to this Manuals

No comments

Commercial Electric DC5237WH-A Use and Care Manual

Browse online or download Use and Care Manual for Unknown Commercial Electric DC5237WH-A. Commercial Electric DC5237WH-A Use and Care Manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Commercial Electric DC5237WH-A